Juniper EX2200 Hardware Guide

vlan (802.1Q Tagging)
Syntax vlan {
members [(all | names | vlan-ids)];
}
Hierarchy Level [edit interfaces interface-name unit logical-unit-number family ethernet-switching]
Release Information Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description Bind an 802.1Q VLAN tag ID to a logical interface.
The remaining statement is explained separately.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• show ethernet-switching interfaces
• show ethernet-switching interface
• Example: Setting Up Bridging with Multiple VLANs for EX Series Switches
• Configuring Routed VLAN Interfaces (CLI Procedure)
• Configuring Integrated Routing and Bridging Interfaces (CLI Procedure)
• Understanding Bridging and VLANs on EX Series Switches
• Junos OS Ethernet Interfaces Configuration Guide
227Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g