Juniper EX2200 - Unsupported Statements in the [Edit Interfaces Irb] Hierarchy Level; [Edit Interfaces Lo] Configuration Statement Hierarchy on EX Series; Switches; Table 36: Unsupported [Edit Interfaces Irb] Configuration Statements for EX

}
}
}
Unsupported Statements in the [edit interfaces irb] Hierarchy Level
All statements in the [edit interfaces irb] hierarchy level that are displayed in the
command-line interface (CLI) on the switch are supported on the switch and operate
as documented with the following exceptions:
Table 36: Unsupported [edit interfaces irb] Configuration Statements for EX Series Switches
HierarchyStatement
[edit interfaces irb]encapsulation
[edit interfaces irb unit]layer2-policer
[edit interfaces irb unit family]ccc
[edit interfaces irb unit family]mpls
[edit interfaces irb unit family]tcc
[edit interfaces irb unit family]vpls
[edit interfaces irb unit family inet]policer
[edit interfaces irb unit family inet]sampling
[edit interfaces irb unit family inet]service
[edit interfaces irb unit family inet]targeted-broadcast
[edit interfaces irb unit family inet]unnumbered-address
[edit interfaces irb unit family inet address vrrp-group track interface]bandwidth-threshold
[edit interfaces irb unit family inet6]service
[edit interfaces irb unit family inet6 address vrrp-inet6-group track interface]bandwidth-threshold
[edit interfaces irb unit family inet6 filter]group
Related
Documentation
[edit interfaces] Configuration Statement Hierarchy on EX Series Switches on page 108•
[edit interfaces lo] Configuration Statement Hierarchy on EX Series Switches
This topic lists supported and unsupported configuration statements in the [edit interfaces
lo] hierarchy level on EX Series switches.
137Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements