Juniper EX2200 Hardware Guide

•
switch-options redundant-trunk-group group-name interface
•
switch-options voip interface
Related
Documentation
Interface Ranges on page 66•
• EX Series Switches Interfaces Overview on page 3
• Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 32
• Configuring Aggregated Ethernet Links (CLI Procedure) on page 82
• Configuring a Layer 3 Subinterface (CLI Procedure) on page 97
• interface-range on page 193
802.1Q VLANs Overview
For Ethernet, Fast Ethernet, Tri-Rate Ethernet copper, Gigabit Ethernet, 10-Gigabit
Ethernet, and aggregated Ethernet interfaces supporting VPLS, the Junos OS supports
a subset of the IEEE 802.1Q standard for channelizing an Ethernet interface into multiple
logical interfaces, allowing many hosts to be connected to the same Gigabit Ethernet
switch, but preventing them from being in the same routing or bridging domain.
Related
Documentation
• Configuring Dynamic 802.1Q VLANs
• 802.1Q VLAN IDs and Ethernet Interface Types
• Enabling VLAN Tagging
• Binding VLAN IDs to Logical Interfaces
• Configuring VLAN Encapsulation
• Configuring Extended VLAN Encapsulation
• Guidelines for Configuring VLAN ID List-Bundled Logical Interfaces That Connect CCCs
• Configuring a Layer 2 VPN Routing Instance on a VLAN-Bundled Logical Interface
• Configuring a VLAN-Bundled Logical Interface to Support a Layer 2 VPN Routing Instance
• Specifying the Interface Over Which VPN Traffic Travels to the CE Router
• Specifying the Interface to Handle Traffic for a CCC
• Configuring a Layer 2 Circuit on a VLAN-Bundled Logical Interface
• Configuring a VLAN-Bundled Logical Interface to Support a Layer 2 VPN Routing Instance
• Specifying the Interface to Handle Traffic for a CCC Connected to the Layer 2 Circuit
• Example: Configuring a Layer 2 VPN Routing Instance on a VLAN-Bundled Logical Interface
• Example: Configuring a Layer 2 Circuit on a VLAN-Bundled Logical Interface
• Configuring a Logical Interface for Access Mode
• Configuring a Logical Interface for Trunk Mode
• Configuring the VLAN ID List for a Trunk Interface
Copyright © 2015, Juniper Networks, Inc.26
Network Interfaces for EX4300 Switches

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g