Juniper EX2200 - Unsupported Statements in the [Edit Interfaces Ge] Hierarchy Level; Table 34: Unsupported [Edit Interfaces Ge] Configuration Statements for EX

Unsupported Statements in the [edit interfaces ge] Hierarchy Level
All statements in the [edit interfaces ge] hierarchy level that are displayed in the
command-line interface (CLI) on the switch are supported on the switch and operate
as documented with the following exceptions:
Table 34: Unsupported [edit interfaces ge] Configuration Statements for EX Series Switches
HierarchyStatement
[edit interfaces ge]passive-monitor-mode
[edit interfaces ge]stacked-vlan-tagging
[edit interfaces ge ether-options]asynchronous-notification
[edit interfaces ge ether-options]ignore-l3-incompletes
[edit interfaces ge ether-options]mpls
[edit interfaces ge ether-options]source-address-filter
[edit interfaces ge ether-options]source-filtering
[edit interfaces ge ether-options]no-source-filtering
[edit interfaces ge unit]accept-source-mac
[edit interfaces ge unit]layer2-policer
[edit interfaces ge unit]native-inner-vlan-id
[edit interfaces ge unit]vlan-id-range
[edit interfaces ge unit]vlan-tags
[edit interfaces ge unit family]mpls
[edit interfaces ge unit family]tcc
[edit interfaces ge unit family]vpls
[edit interfaces ge unit family ethernet-switching]bridge-domain-type
[edit interfaces ge unit family ethernet-switching]inner-vlan-id-list
[edit interfaces ge unit family ethernet-switching]vlan-rewrite
[edit interfaces ge unit family inet]policer
Copyright © 2015, Juniper Networks, Inc.124
Network Interfaces for EX4300 Switches