Juniper EX2200 - Unsupported Statements in the [Edit Interfaces Et] Hierarchy Level; Table 33: Unsupported [Edit Interfaces Et] Configuration Statements for EX

}
family iso {
address interface-address;
mtu bytes;
}
input-vlan-map action;
output-vlan-map action;
proxy-arp (restricted | unrestricted);
swap-by-poppush;
(traps | no-traps);
vlan-id vlan-id-number;
vlan-id-list [vlan-id vlan-id–vlan-id];
}
vlan-tagging;
}
}
Unsupported Statements in the [edit interfaces et] Hierarchy Level
All statements in the [edit interfaces et] hierarchy level that are displayed in the
command-line interface (CLI) on the switch are supported on the switch and operate
as documented with the following exceptions:
Table 33: Unsupported [edit interfaces et] Configuration Statements for EX Series Switches
HierarchyStatement
[edit interfaces et]passive-monitor-mode
[edit interfaces et]stacked-vlan-tagging
[edit interfaces et ether-options]asynchronous-notification
[edit interfaces et ether-options]ignore-l3-incompletes
[edit interfaces et ether-options]mpls
[edit interfaces et ether-options]source-address-filter
[edit interfaces et ether-options]source-filtering
[edit interfaces et ether-options]no-source-filtering
[edit interfaces et unit]accept-source-mac
[edit interfaces et unit]layer2-policer
[edit interfaces et unit]native-inner-vlan-id
[edit interfaces et unit]vlan-id-range
[edit interfaces et unit]vlan-tags
Copyright © 2015, Juniper Networks, Inc.118
Network Interfaces for EX4300 Switches