Juniper EX2200 - Table 44: Request Diagnostics Tdr Output Fields

Table 44: request diagnostics tdr Output Fields
Field DescriptionField Name
Information about the status of the TDR test request:
• Admin Down interface-name—The interface is administratively down.
The TDR test cannot run on interfaces that are administratively down.
• Interface interface-name not found—The interface does not exist.
• Test successfully executed interface-name—The test has successfully
started on the interface. You can view the test results with the show
diagnostics tdr command.
• VCT not supported on interface-name—The TDR test is not supported
on the interface.
Test Status
Sample Output
request diagnostics tdr start interface ge-0/0/19
user@switch> request diagnostics tdr start interface ge-0/0/19
Interface TDR detail:
Test status : Test successfully executed ge-0/0/19
253Copyright © 2015, Juniper Networks, Inc.
Chapter 5: Operational Commands