Juniper EX2200 Hardware Guide

List of Sample Output show interfaces xe-4/1/0 on page 316
show interfaces xe-0/1/0 brief on page 317
show interfaces xe-4/1/0 detail on page 317
show interfaces xe-6/0/39 extensive on page 318
Output Fields Table 52 on page 308 lists the output fields for the show interfaces xe- command. Output
fields are listed in the approximate order in which they appear.
Table 52: show interfaces xe- Output Fields
Level of OutputField DescriptionField Name
Fields for the Terse Output Level Only
terseName of the physical or logical interface.Interface
terseAdministrative state of the interface.Admin
terseState of the physical link.Link
terseProtocol family configured on the logical interface.Proto
terseLocal IP address of the logical interface.Local
terseRemote IP address of the logical interface.Remote
Fields for the Physical Interface
brief
detail
extensive
none
Name of the physical interface.Physical interface
brief
detail
extensive
none
State of the interface. Can be one of the following:
• Administratively down, Physical link is Down—The interface is turned off, and
the physical link is inoperable and cannot pass packets even when it is
enabled.
• Administratively down, Physical link is Up—The interface is turned off, but the
physical link is operational and can pass packets when it is enabled.
• Enabled, Physical link is Down—The interface is turned on, but the physical
link is inoperable and cannot pass packets.
• Enabled, Physical link is Up—The interface is turned on, and the physical link
is operational and can pass packets.
Enabled
detail
extensive
none
Index number of the physical interface, which reflects its initialization sequence.Interface index
detail
extensive
none
SNMP index number for the physical interface.SNMP ifIndex
detail
extensive
Unique number for use by Juniper Networks technical support only.Generation
Copyright © 2015, Juniper Networks, Inc.308
Network Interfaces for EX4300 Switches

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g