Table 32: Unsupported [edit interfaces ae] Configuration Statements for EX Series
Switches (continued)
HierarchyStatement
[edit interfaces ae unit family inet6]service
[edit interfaces ae unit family inet6 address vrrp-group track interface]bandwidth-threshold
[edit interfaces ae unit family inet6 filter]group
[edit interfaces ae unit input-vlan-map]pop
[edit interfaces ae unit output-vlan-map]push
Related
Documentation
[edit interfaces] Configuration Statement Hierarchy on EX Series Switches on page 108•
[edit interfaces et] Configuration Statement Hierarchy on EX Series Switches
This topic lists supported and unsupported configuration statements in the [edit interfaces
et] hierarchy level on EX Series switches.
•
Supported statements are those that you can use to configure some aspect of a
software feature on the switch.
•
Unsupported statements are those that appear in the command-line interface (CLI)
on the switch, but that have no effect on switch operation if you configure them.
•
Not all features are supported on all switch platforms. For detailed information about
feature support on specific EX Series switch platforms, see EX Series Switch Software
Features Overview.
This topic lists:
•
Supported Statements in the [edit interfaces et] Hierarchy Level on page 114
•
Unsupported Statements in the [edit interfaces et] Hierarchy Level on page 118
Supported Statements in the [edit interfaces et] Hierarchy Level
The following hierarchy shows the [edit interfaces et] configuration statements supported
on EX Series switches.
interfaces {
et-fpc/pic/port {
accounting-profile name;
description text;
disable;
encapsulation type;
ether-options {
802.3ad {
aex;
(backup | primary);
Copyright © 2015, Juniper Networks, Inc.114
Network Interfaces for EX4300 Switches