Juniper EX2200 - Page 135

lacp {
force-up;
port-priority number;
}
}
ethernet-switch-profile {
tag-protocol-id [tpids];
}
(flow-control | no-flow-control);
(loopback | no-loopback);
no-auto-mdix;
}
flexible-vlan-tagging;
(gratuitous-arp-reply | no-gratuitous-arp-reply);
hold-time up milliseconds down milliseconds;
mtu bytes;
native-vlan-id
no-gratuitous-arp-request;
traceoptions {
flag flag;
}
(traps | no-traps);
unit logical-unit-number {
accounting-profile name;
bandwidth rate;
description text;
disable;
encapsulation type;
family ccc;
filter {
group group-number;
input filter-name;
input-list [filter-names];
output filter-name;
output-list [filter-names];
}
policer {
input policer-name;
output policer-name;
}
}
family ethernet-switching {
filter {
input filter-name;
output filter-name;
}
interface-mode (access | trunk);
recovery-timeout seconds;
storm-control profile-name;
vlan {
members (vlan-name |[-vlan-names] | all);
}
}
family inet {
accounting {
destination-class-usage;
115Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements