Related
Documentation
[edit interfaces] Configuration Statement Hierarchy on EX Series Switches on page 108•
[edit protocols lacp] Configuration Statement Hierarchy on EX Series Switches
This topic lists supported and unsupported configuration statements in the [edit protocols
lacp] hierarchy level on EX Series switches.
•
Supported statements are those that you can use to configure some aspect of a
software feature on the switch.
•
Unsupported statements are those that appear in the command-line interface (CLI)
on the switch, but that have no effect on switch operation if you configure them.
•
Not all features are supported on all switch platforms. For detailed information about
feature support on specific EX Series switch platforms, see EX Series Switch Software
Features Overview.
This topic lists:
•
Supported Statements in the [edit protocols lacp] Hierarchy Level on page 153
•
Unsupported Statements in the [edit protocols lacp] Hierarchy Level on page 153
Supported Statements in the [edit protocols lacp] Hierarchy Level
The following hierarchy shows the [edit protocols lacp] configuration statements
supported on EX Series switches:
protocols {
lacp {
ppm {
centralized
}
traceoptions {
file <filename> <files number> <match regular-expression> <size maximum-file-size>
<world-readable | no-world-readable>;
flag flag;
no-remote-trace;
}
}
}
Unsupported Statements in the [edit protocols lacp] Hierarchy Level
All statements in the [edit protocols lacp] hierarchy level that are displayed in the
command-line interface (CLI) on the switch are supported on the switch and operate
as documented.
Related
Documentation
[edit protocols] Configuration Statement Hierarchy on EX Series Switches•
153Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements