no-l4-source-port—Exclude the Layer 4 source port field from the hashing algorithm.
no-next-header—Exclude the Next Header field from the hashing algorithm.
vlan-id—Include the VLAN ID field in the hashing algorithm.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring the Fields in the Algorithm Used To Hash LAG Bundle and ECMP Traffic
(CLI Procedure) on page 94
• Understanding the Algorithm Used to Hash LAG Bundle and Egress Next-Hop ECMP
Traffic on page 11
• enhanced-hash-key on page 170
• hash-mode on page 183
• inet on page 187
interface (Multichassis Protection)
Syntax interface interface-name;
Hierarchy Level [edit multi-chassis multi-chassis-protection peer]
Release Information Statement introduced in Junos OS Release 9.6 for MX Series routers.
Statement introduced in Junos OS Release 12.2 for the QFX Series.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Description Specify the name of the interface that is being used as an interchassis link-protection
link (ICL-PL). The two switches hosting a multichassis link aggregation group (MC-LAG)
use this link to pass Inter-Chassis Control Protocol (ICCP) and data traffic.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Copyright © 2015, Juniper Networks, Inc.190
Network Interfaces for EX4300 Switches