Juniper EX2200 - Laser Beam Warning

ethernet (Aggregated Devices)
Syntax ethernet {
device-count number;
lacp {
link-protection {
non-revertive;
}
system-priority;
}
Hierarchy Level [edit chassis aggregated-devices]
Release Information Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description Configure properties for Ethernet aggregated devices on the switch.
The remaining statement is explained separately.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring Aggregated Ethernet Links (CLI Procedure) on page 82
• Configuring LACP Link Protection of Aggregated Ethernet Interfaces (CLI Procedure)
on page 87
• Junos OS Ethernet Interfaces Configuration Guide
eui-64
Syntax eui-64;
Hierarchy Level [edit interfaces interface-name unit number family inet6 address address]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Statement introduced in Junos OS Release 12.2 for the QFX Series.
Description For interfaces that carry IP version 6 (IPv6) traffic, automatically generate the host
number portion of interface addresses.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring the Interface Address on page 48
173Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements