Juniper EX2200 - Unsupported Statements in the [Edit Interfaces Lo] Hierarchy Level; [Edit Interfaces Me] Configuration Statement Hierarchy on EX Series; Switches; Table 37: Unsupported [Edit Interfaces Lo] Configuration Statements for EX

}
}
(dad-disable | no-dad-disable);
filter {
group group-name;
input filter-name;
output filter-name;
}
no-neighbor-learn;
policer {
input policer-name;
output policer-name;
}
}
family iso {
address interface-address;
}
family mpls;
(traps | no-traps);
}
}
}
Unsupported Statements in the [edit interfaces lo] Hierarchy Level
All statements in the [edit interfaces lo] hierarchy level that are displayed in the
command-line interface (CLI) on the switch are supported on the switch and operate
as documented with the following exceptions:
Table 37: Unsupported [edit interfaces lo] Configuration Statements for EX Series Switches
HierarchyStatement
[edit interfaces lo unit]layer2-policer
[edit interfaces lo unit family]any
[edit interfaces lo unit family]tcc
[edit interfaces lo unit family inet]policer
[edit interfaces lo unit family inet]unnumbered-address
Related
Documentation
[edit interfaces] Configuration Statement Hierarchy on EX Series Switches•
• [edit interfaces] Configuration Statement Hierarchy on EX Series Switches on page 108
[edit interfaces me] Configuration Statement Hierarchy on EX Series Switches
This topic lists supported and unsupported configuration statements in the [edit interfaces
me] hierarchy level on EX Series switches.
Copyright © 2015, Juniper Networks, Inc.140
Network Interfaces for EX4300 Switches