Juniper EX2200 - Page 159

}
priority-hold-time seconds;
route ip-address/mask routing-instance instance-name priority-cost cost;
}
virtual-address [ addresses ];
virtual-link-local-address address;
vrrp-inherit-from {
active-group group-number;
active-interface interface-name;
}
}
}
dhcp {
client-identifier (ascii client-id | hexadecimal client-id);
lease-time (seconds | infinte);
retransmission-attempt number;
retransmission-interval sections;
server-address ip-address;
update-server
vendor-id
}
filter {
input filter-name;
output filter-name;
}
no-neighbor-learn;
no-redirects;
primary;
}
family inet6 {
address address {
preferred;
primary;
vrrp-inet6-group group-id {
accept-data | no-accept-data;
authentication-key key;
authentication-type authentication;
fast-interval milliseconds;
inet6-advertise-interval milliseconds;
preempt | no-preempt {
hold-time seconds;
}
priority number;
track {
interface interface-name {
bandwidth-threshold bandwidth priority-cost number;
priority-cost number;
}
priority-hold-time seconds;
route ( address | routing-instance routing-instance-name );
}
virtual-inet6-address [addresses];
virtual-link-local-address ipv6–address;
vrrp-inherit-from {
active-group group-name;
active-interface interface-name;
139Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements