Juniper EX2200 Hardware Guide

family
Syntax family ccc on page 174
family ethernet-switching on page 174
family inet on page 174
family inet6 on page 176
family iso on page 177
family ccc family ccc;
filter {
group group-number;
input filter-name;
input-list [filter-names];
output filter-name;
output-list [filter-names];
}
policer {
input policer-name;
output policer-name;
}
}
family
ethernet-switching
family ethernet-switching {
filter {
input filter-name;
output filter-name;
}
interface-mode (access | trunk);
recovery-timeout seconds;
storm-control profile-name;
vlan {
members (vlan-name |[-vlan-names] | all);
}
}
family inet family inet {
accounting {
destination-class-usage;
source-class-usage {
input;
output;
}
}
address ipv4-address {
arp ip-address (mac | multicast-mac) mac-address <publish>;
broadcast address;
preferred;
primary;
vrrp-group group-number {
(accept-data | no-accept-data);
advertise–interval seconds;
advertisements-threshold number;
authentication-key key;
authentication-type authentication;
Copyright © 2015, Juniper Networks, Inc.174
Network Interfaces for EX4300 Switches

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g