filter
Syntax filter {
group filter-group-number;
input filter-name;
input-list [ filter-names ];
output filter-name;
output-list [ filter-names ];
}
Hierarchy Level [edit interfaces interface-name unit logical-unit-number family family],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family family]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.1 for the QFX Series.
Description Apply a filter to an interface. You can also use filters for encrypted traffic. When you
configure filters, you can configure them under the family ethernet-switching, inet, inet6,
mpls, or vpls only.
NOTE: On QFX3500 and QFX3600 switches running Enhanced Layer 2
Software, VPLS is not supported.
Options group filter-group-number—Define an interface to be part of a filter group.
Range: 1 through 255
input filter-name—Name of one filter to evaluate when packets are received on the
interface.
output filter-name—Name of one filter to evaluate when packets are transmitted on the
interface.
The remaining statements are explained separately.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
Applying a Filter to an Interface•
• Junos OS Services Interfaces Library for Routing Devices
• Routing Policy Feature Guide for Routing Devices
• Junos OS Administration Library for Routing Devices
• Configuring Gigabit Ethernet Interfaces (CLI Procedure)
• Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 32
Copyright © 2015, Juniper Networks, Inc.180
Network Interfaces for EX4300 Switches
To Next Page
Loading...
