Juniper EX2200 - Page 165

unit logical-unit-number {
accounting-profile name;
arp-resp;
bandwidth rate;
description text;
disable;
family inet {
accounting {
destination-class-usage;
source-class-usage {
input;
output;
}
}
address ipv4-address {
arp ip-address (mac | multicast-mac) mac-address <publish>;
broadcast address;
master-only;
preferred;
primary;
vrrp-group group-number {
(accept-data | no-accept-data);
advertise–interval seconds;
authentication-key key;
authentication-type authentication;
fast-interval milliseconds;
(preempt | no-preempt) {
hold-time seconds;
}
priority number;
track {
interface interface-name {
bandwidth-threshold bandwidth;
priority-cost number;
}
priority-hold-time seconds;
route ip-address/mask routing-instance instance-name priority-cost cost;
}
virtual-address [ addresses ];
virtual-link-local-address address;
vrrp-inherit-from {
active-group group-number;
active-interface interface-name;
}
}
}
dhcp {
client-identifier (ascii client-id | hexadecimal client-id);
lease-time (seconds | infinte);
retransmission-attempt number;
retransmission-interval sections;
server-address ip-address;
update-server
vendor-id
}
filter {
145Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements