Juniper EX2200 - Connecting an EX2200 Switch to a Management Console Using Mini-USB Type-B Console Port

no-gratuitous-arp-request;
speed speed;
traceoptions {
flag flag;
}
(traps | no-traps);
unit logical-unit-number {
accept-source-mac {
mac-address mac-address {
policer {
input policer-name;
output policer-name;
}
}
}
accounting-profile name;
arp-resp;
bandwidth rate;
description text;
disable;
family ccc;
family ethernet-switching {
filter {
input filter-name;
output filter-name;
}
interface-mode (access | trunk);
recovery-timeout seconds;
storm-control profile-name;
vlan {
members [ members];
}
}
family inet {
accounting {
destination-class-usage;
source-class-usage;
}
address ipv4-address {
arp ip-address (mac | multicast-mac) mac-address <publish>;
broadcast address;
destination-class-usage;
destination-profile;
master-only;
preferred;
primary;
vrrp-group group-number {
(accept-data | no-accept-data);
advertise–interval seconds;
authentication-key key;
authentication-type authentication;
fast-interval milliseconds;
(preempt | no-preempt) {
hold-time seconds;
}
priority number;
127Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements