Juniper EX2200 Hardware Guide

}
}
address ipv4-address {
arp ip-address (mac | multicast-mac) mac-address <publish>;
broadcast address;
master-only;
preferred;
primary;
}
dhcp {
client-identifier (ascii client-id | hexadecimal client-id);
lease-time (seconds | infinte);
retransmission-attempt number;
retransmission-interval sections;
server-address ip-address;
update-server
vendor-id
}
filter {
input filter-name;
output filter-name;
}
mtu bytes;
no-neighbor-learn;
primary;
rpf-check;
}
family inet6 {
accounting {
destination-class-usage;
source-class-usage {
input;
output;
}
}
address address {
eui-64;
ndp ip-address (mac | multicast-mac) mac-address <publish>;
preferred;
primary;
}
(dad-disable | no-dad-disable);
filter {
group group-name;
input filter-name;
output filter-name;
}
mtu bytes;
no-neighbor-learn;
policer {
input policer-name;
output policer-name;
}
rpf-check;
}
family iso {
Copyright © 2015, Juniper Networks, Inc.142
Network Interfaces for EX4300 Switches

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g