vlan-id—Include the VLAN ID field in the hashing algorithm.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring the Fields in the Algorithm Used To Hash LAG Bundle and ECMP Traffic
(CLI Procedure) on page 94
• Understanding the Algorithm Used to Hash LAG Bundle and Egress Next-Hop ECMP
Traffic on page 11
• enhanced-hash-key on page 170
• hash-mode on page 183
199Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements
To Next Page
Loading...
