Juniper EX2200 Hardware Guide

Table 47: show interfaces diagnostics optics Output Fields (continued)
Field DescriptionField Name
Displays whether the laser output power low warning is On or
Off.
Laser output power low warning
(Not available for QSFP+ transceivers)
Displays whether the laser temperature high alarm is On or Off.Laser temperature high alarm
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays whether the laser temperature low alarm is On or Off.Laser temperature low alarm
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays whether the laser temperature high warning is On or
Off.
Laser temperature high warning
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays whether the laser temperature low warning is On or
Off.
Laser temperature low warning
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays whether the module temperature high alarm is On or
Off.
Module temperature high alarm
(Not available for QSFP+ transceivers)
Displays whether the module temperature low alarm is On or
Off.
Module temperature low alarm
(Not available for QSFP+ transceivers)
Displays whether the module temperature high warning is On
or Off.
Module temperature high warning
(Not available for QSFP+ transceivers)
Displays whether the module temperature low warning is On
or Off.
Module temperature low warning
(Not available for QSFP+ transceivers)
Displays whether the module voltage high alarm is On or Off.Module voltage high alarm
(Not available for XFP and QSFP+ transceivers)
Displays whether the module voltage low alarm is On or Off.Module voltage low alarm
(Not available for XFP and QSFP+ transceivers)
Displays whether the module voltage high warning is On or Off.Module voltage high warning
(Not available for XFP and QSFP+ transceivers)
Displays whether the module voltage low warning is On or Off.Module voltage low warning
(Not available for XFP and QSFP+ transceivers)
Copyright © 2015, Juniper Networks, Inc.264
Network Interfaces for EX4300 Switches

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g