Juniper EX2200 - Page 288

Table 47: show interfaces diagnostics optics Output Fields (continued)
Field DescriptionField Name
Displays the vendor-specified threshold for the laser rx power
low warning.
Laser rx power low warning threshold
(Not available for QSFP+ transceivers)
Displays the vendor-specified threshold for the laser
temperature high alarm, in Celsius and Fahrenheit.
Laser temperature high alarm threshold
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays the vendor-specified threshold for the laser
temperature low alarm, in Celsius and Fahrenheit.
Laser temperature low alarm threshold
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays the vendor-specified threshold for the laser
temperature high warning, in Celsius and Fahrenheit.
Laser temperature high warning threshold
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays the vendor-specified threshold for the laser
temperature low warning, in Celsius and Fahrenheit.
Laser temperature low warning threshold
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays the vendor-specified threshold for SOA bias current
high alarm.
SOA bias current high alarm threshold
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays the vendor-specified threshold for SOA bias current
low alarm.
SOA bias current low alarm threshold
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays the vendor-specified threshold for SOA bias current
high warning.
SOA bias current high warning threshold
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays the vendor-specified threshold for SOA bias current
low warning.
SOA bias current low warning threshold
(Not available for SFP, SFP+, XFP, and QSFP+ transceivers)
Displays whether the laser receiver power high alarm is On or
Off.
Laser receiver power high alarm
(Not available for SFP, SFP+, and XFP transceivers)
Displays whether the laser receiver power low alarm is On or
Off.
Laser receiver power low alarm
(Not available for SFP, SFP+, and XFP transceivers)
Displays whether the laser receiver power high warning is On
or Off.
Laser receiver power high warning
(Not available for SFP, SFP+, and XFP transceivers)
Displays whether the laser receiver power low warning is On or
Off.
Laser receiver power low warning
(Not available for SFP, SFP+, and XFP transceivers)
Copyright © 2015, Juniper Networks, Inc.268
Network Interfaces for EX4300 Switches