• You can display summary information about the last TDR test results for all interfaces
on the switch that support the TDR test by not specifying an interface name with the
show diagnostics tdr command. For example:
user@switch> show diagnostics tdr
Interface Test status Link status Cable status Max distance fault
ge-0/0/0 Passed UP OK 0
ge-0/0/1 Not Started N/A N/A N/A
ge-0/0/2 Passed UP OK 0
ge-0/0/3 Not Started N/A N/A N/A
ge-0/0/4 Passed UP OK 0
ge-0/0/5 Passed UP OK 0
ge-0/0/6 Passed UP OK 0
ge-0/0/7 Not Started N/A N/A N/A
ge-0/0/8 Passed Down OK 0
ge-0/0/9 Not Started N/A N/A N/A
ge-0/0/10 Passed Down Fault 1
ge-0/0/11 Passed UP OK 0
ge-0/0/12 Not Started N/A N/A N/A
ge-0/0/13 Not Started N/A N/A N/A
ge-0/0/14 Not Started N/A N/A N/A
ge-0/0/15 Not Started N/A N/A N/A
ge-0/0/16 Not Started N/A N/A N/A
ge-0/0/17 Not Started N/A N/A N/A
ge-0/0/18 Not Started N/A N/A N/A
ge-0/0/19 Passed Down OK 0
ge-0/0/20 Not Started N/A N/A N/A
ge-0/0/21 Not Started N/A N/A N/A
ge-0/0/22 Passed UP OK 0
ge-0/0/23 Not Started N/A N/A N/A
Related
Documentation
• Troubleshooting Interface Configuration and Cable Faults on page 330
• request diagnostics tdr on page 252
• show diagnostics tdr on page 254
Copyright © 2015, Juniper Networks, Inc.334
Network Interfaces for EX4300 Switches
To Previous Page
Loading...
