Keysight B2961A/B2962A SCPI Command Reference, Edition 6 2- 73
Subsystem Command Summary
Using Advanced Functions
:SYST:COMM:LAN:GAT address
:SYST:COMM:LAN:GATE address
:SYST:COMM:LAN:GAT? [CURR|STAT]
:SYST:COMM:LAN:GATE? [CURR|STAT]
Sets the IP address of the default gateway.
The setting is enabled by the
:SYST:COMM:LAN:UPD command.
address=A.B.C.D, 15 characters
maximum. A, B, C, and D must be a
number from 0 to 225.
CURR: Present setup value
STAT: Reserved value for the next startup
:SYST:COMM:LAN:HNAM hostname
:SYST:COMM:LAN:HOST hostname
:SYST:COMM:LAN:HNAM? [CURR|STAT]
:SYST:COMM:LAN:HOST? [CURR|STAT]
Sets the host name of the instrument. The
setting is enabled by the
:SYST:COMM:LAN:UPD command.
hostname: Host name. Up to 15
characters.
CURR: Present setup value
STAT: Reserved value for the next startup
:SYST:COMM:LAN:MAC?
Returns the MAC address of the
instrument.
:SYST:COMM:LAN:SMAS subnet_mask
:SYST:COMM:LAN:SMAS? [CURR|STAT]
Sets the static subnet mask. The setting is
enabled by the :SYST:COMM:LAN:UPD
command.
subnet_mask=A.B.C.D, 15 characters
maximum. A, B, C, and D must be a
number from 0 to 255.
CURR: Present setup value
STAT: Reserved value for the next startup
:SYST:COMM:LAN:TELN:PROM prompt
:SYST:COMM:LAN:TELN:PROM?
Sets the command prompt displayed
during a Telnet session for establishing
communication with the instrument.
prompt: Command prompt. Up to 15
characters.
Command Summary Reset setting
To Next Page
Loading...
