Keysight Technologies B2961A Command Reference

Keysight B2961A/B2962A SCPI Command Reference, Edition 6 2- 31
Subsystem Command Summary
Setting Source Output and Measurement
:SENS[c]:REM mode
:SENS[c]:REM?
Enables or disables the remote sensing.
Remote sensing must be enabled to use
the 4-wire connection (Kelvin
connection).
mode=1|ON|0|OFF
OFF
:SENS[c]:RES:OCOM mode
:SENS[c]:RES:OCOM?
Enables or disables the
offset-compensated resistance
measurement.
mode=1|ON|0|OFF
OFF
:SENS[c]:TOUT:SIGN output{,outpu
t}
:SENS[c]:TOUT:SIGN output{,outpu
t}
:SENS[c]:TOUT:SIGN output{,outpu
t}
:SENS[c]:TOUT:SIGN?
:SENS[c]:TOUT:SIGN?
Selects the trigger output for the status
change between the trigger layer and the
acquire device action.
output=INT1|INT2|LAN|EXT1|EXT2|
EXT3|EXT4|EXT5|EXT6|EXT7|EXT8|
EXT9|EXT10|EXT11|EXT12|EXT13|
EXT14
EXT1
:SENS[c]:TOUT[:STAT] mode
:SENS[c]:TOUT[:STAT] mode
:SENS[c]:TOUT[:STAT] mode
:SENS[c]:TOUT[:STAT]?
:SENS[c]:TOUT[:STAT]?
Enables or disables the trigger output for
the status change between the trigger
layer and the acquire device action.
mode=1|ON|0|OFF
OFF
:SENS[c]:WAIT:AUTO mode
:SENS[c]:WAIT:AUTO?
Enables or disables the initial wait time
used for calculating the measurement
wait time for the specified channel. See
:SENS[c]:WAIT[:STAT].
mode=1|ON|0|OFF
ON
Command Summary Reset setting

Keysight Technologies B2961A Specifications

General

Brand	Keysight Technologies
Model	B2961A
Category	Portable Generator
Language	English