1Introduction
36 Keysight N1911A/1912A User’s Guide
These keys and connectors are associated with the measurement channels and
are located on the right-hand side of the front panel.
Key Function
The arrow keys are used for navigation around the parameter entry screens.
The up and down arrows are used for selecting values from a pop-up list, they
can also be used for stepping two values, X Scale and Y Scale. They are also
used to enter text, for example, table names.
Press this key to select a highlighted field to allow data entry, check a
checkbox and terminate entry of a popup list.
Press this key to access the zero and calibration menus.
To Next Page
Loading...
