Keysight N9038A Service Guide

Keysight N9038A MXE Service Guide 103
Instrument Messages
Event Messages
–255 Directory full A legal command or query could not be executed because the media directory
was full
–256 File name not found; A legal command or query could not be executed because the file name was
not found in the specified location
–257 File name error; A legal command or query could not be executed because there was an error
with the file name on the device media. For example, maybe you tried to copy
to a duplicate file name
–257 File name error;
Allowable extension
is .csv
You are using the wrong type of file extension for the current data/file type
–257 File name error;
Allowable extension
is .png
You are using the wrong type of file extension for the current data/file type
–257 File name error;
Allowable extension
is .state
You are using the wrong type of file extension for the current data/file type
–257 File name error;
Invalid file name
The filename, directory name, or volume label syntax is incorrect
–257 File name error; name
too long
–258 Media protected A legal command or query could not be executed because the media was
protected. For example, the write-protect was set
–260 Expression error An error was found with an expression type of data element. The exact problem
cannot be specifically identified
–261 Math error in
expression
An expression that has legal syntax could not be executed because of a math
error. For example, maybe you are dividing by zero
–270 Macro error Indicates that a macro-related execution error occurred
–271 Macro syntax error Indicates a syntax error within the macro definition
–272 Macro execution error Indicates that a syntactically legal macro program data sequence could not be
executed due to some error in the macro definition
–273 Illegal macro label Indicates that the macro label defined in the *DMC command was a legal string
syntax, but could not be accepted
–274 Macro parameter error Indicates that the macro definition improperly used a macro parameter
placeholder
–275 Macro definition too
long
Indicates that a syntactically legal macro program data sequence could not be
executed because the string or block contents were too long for the device to
handle
–276 Macro recursion error Indicates that a syntactically legal macro program data sequence could not be
executed because the device found it to be recursive
Err# Message Verbose/Correction Information

Keysight N9038A Specifications

General

Brand	Keysight
Model	N9038A
Category	Measuring Instruments
Language	English