Chapter.7 MDP-621/641/640
Radar operation Operationmanual
7-8 93161022-03
7.4.2 Measuring the bearing / distance（EBL1, VRM1）
By using the bearing cursor (EBL1), the target bearing can be determined.
By using the distance marker (VRM1), the distance to the target can be determined.
(1) EBL1
Display the soft menu (RADAR/PAGE2) and press the ”EBL1” key.
The EBL1 adjustment box is displayed.
Using the rotary control, position the screen EBL1 cursor on the target and then read-off the bearing.
To cancel EBL1 press the “EBL1” key while the adjustment box is displayed.
(2) VRM1
Display the soft key menu (RADAR/PAGE2) and press the ”VRM1” key.
The VRM1 adjustment box is displayed.
Using the rotary control, position the VRM1 marker on the target and read-off the distance.
To cancel VRM1 press the “VRM1” key while the adjustment box is displayed.
To Next Page
Loading...
