Koden MDP-621 - Adjusting the Antenna Height (Antenna)

Chapter 10MDP-621/641/640
MENU operation Operation manual
READ OPERATION MANUAL
TUNE WITH CONTROL KNOB
PRESS ENTER KEY TO MEMORY
31
AUTO
＋
10.4.6.4 Adjusting the antenna height (Antenna)
Depending on the height at which the antenna is installed, it may be necessary to make the following
correction.
(1) Press the “MENU” key and select Adjust→Antenna.
(2) “STC CURVE ADJUSTMENT” will be displayed at the bottom of the screen. Using the rotary
control, choose a desired value from 1 to 9.
(3) Press the “ENTER” key to exit from the Adjusting Antenna Height screen.
＋
STC
CURVE
ADJUSTMENT
A
DJUST WITH CONTROL KNOB
PRESS ENTER KEY TO MEMORY
STC CURVE
5
10-52 0093161022-06