Koden MDP-621 - Page 204

MDP-621/641/640 Chapter 10
Operation manual MENU operation
(4) Stern Mark
Sets the stern mark display ON or OFF.
Initial setting:  OFF

0
OFF
1
ON
Stern Mark




(5) North Mark
Sets the north direction mark display ON or OFF.
Initial setting:  OFF

0
OFF
1
ON
North Mark




(6) WPT Mark
Sets the waypoint mark display ON or OFF.
Initial setting:  ON

0
OFF
1
ON
WPT Mark




(7) Parallel Cursor
Sets the parallel cursor (Moves to EBL1) display ON or OFF.
The distance between the parallel cursor is the same as the fix mark.

0
OFF
1
ON
Parallel Cursor




(8) +MK Line
If the +MK Line is set to ON, the bearing cursor and the distance marker are displayed on the
screen and move in accordance with the cross cursor.

0
OFF
1
ON
+MK Line


0093161022-06 10-43