Koden MDP-621 - Page 232

MDP-621/641/640 Chapter 10
Operation manual MENU operation
10.6.2 GPS Set
The settings for the GPS receiver are carried out in “1 GPS Set” of the Nav MENU.

0
1
2
NAV Information
GPS Set
GPS Monitor
3
4
Loran C Set
Decca Set
5
6
NMEA Output Data
NMEA Monitor
NAV GPS Set
0
Speed averaging
1
LAT Correction
2
LON Correction
3
4
Beacon Station
Beacon Frequency
5
Beacon Baud Rate
6
DGPS Mode
GPS Initialization
7









(1) Speed Averaging
This function stabilizes the speed display by averaging the incoming speed data. As the speed
averaging value becomes larger, the stability gets better but the response to changes in the
speed gets worse.
Setting range: Nil, 1〜60
Initial setting: 1

01
Speed Averaging



(2) LAT Correction
Sets the latitude correction factor.
Setting range:-〜+
Initial setting:  00:00

min
+0.000
LAT Correction




(3) LON Correction
Sets the longitude correction factor.
Setting range: -〜+
Initial setting:  00:00

min
+0.000
LON Correction


0093161022-06 10-71