Chapter 5 MDP-621/641/640
Basic operation Operation manual
5-2 0093161022-06
C-MAP Card Insert the C-MAP card or User C-Card.
Note：Do not pull out the C-MAP card after turning on the power supply.
Rotary control Used for adjusting the GAIN, STC, VRM, EBL, etc and selecting the display
mode, menu, etc.
GOTO
Displays the destination and route soft menu.
１
Performs soft menu operations.
Turns on/off the cross cursor when operating the Plotter.
６
to
FUNC
Changes the operating screen display.
Used for moving the cross cursor and map as well as menu selection.
To Next Page
Loading...
