Krone Big Pack 890 - Menu 1-6-1 Strokes; Blow

KRONE operation terminal Gamma
109
Pos: 26.30.22 /BA/I nfo-Center/Großpacke npresse/Hauptmenü s/Hauptmenü 1 Einstel lungen/Menü 1-6-1 „Hübe / Blasen“ @ 18\mod_123798544 4663_78.doc @ 212015
8.11.6.1 Menu 1-6-1 „Strokes / blow“
BPK40651
A
BPK40650
Fig. 62
(On machines without electronic knotter triggering)
Dust and accumulated crop material is removed from the knotters by compressed air at regular
intervals (depending on the number of piston strokes completed).
Adjusting the number of plunger strokes.
Calling the menu
Main menu 1-6 "Knotter blowing" appears.
• You can select menu 1-6-1
with the rotary potentiometer. The symbol is shown in
reverse colours
• Press the rotary potentiometer
The display shows menu 1-6-1 "Strokes / blow".
The bar display and value (A) indicate the number of plunger strokes completed.
The symbol
in the upper line indicates that the displayed value is saved.
• Press key
for softkey DEF: the factory setting value is accepted. The symbol in
the upper line may go out
• Set the desired number of strokes with the rotary potentiometer. The symbol
in the
top line disappears
• Press the rotary potentiometer. The set contrast value is saved and the symbol
appears in the upper line
• You can use the key
to close the menu currently displayed
The display shows menu level 1-6 "Knotter blowing".
• Pressing the key
repeatedly brings up the basic screen
Pos: 26.30.23 /BA/- ----Seitenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165