Krone Big Pack 890 - High-Pressure Filter

Maintenance
275
Pos: 42.35.1 /Überschr iften/Überschr iften 2/F-J/Hochdr uckfilter @ 26\mod_12458 36423991_78.doc @ 264126
13.9 High-pressure filter
Pos: 42.35.2 /BA/W artung/Hochdruckf ilter/Mitteldruckf ilter @ 32\mod_125309255 8858_78.doc @ 309853
The filter takes up depositions of solid particles of the hydraulic system. The filtering of the
hydraulic circuit serves as a prevention of damages on components of the circuit. The filter is
equipped with an optical contamination indicator (7). The contamination indicator (7) informs
optical about the degree of contamination of the filter
Pos: 42.35.3 /BA/W artung/Hochdruckf ilter/Hinweis Versch mutzungsanzeige vor jede m Arbeitseinsatz kon trollieren @ 32\mod_125 3093743968_78.doc @ 310077
Note
Check the contamination indicator before the machine is used and exchange the contaminated
filter element if necessary.
Pos: 42.35.4 /BA/W artung/Hochdruckf ilter/Wann muss er Filter gewechselt werden @ 33\mod_1254 315575151_78.doc @ 318964
When starting in cold condition the button on the contamination indicator (7) could hop out. Only
press the button back in after achieving the operating temperature. In case it immediately hops
out again, the filter element needs to be changed.
Pos: 42.35.5 /BA/W artung/Hochdruckf ilter/Hochdruckfi lter bei Komfort_Hydrau lik Bild_BiG Pack @ 27\mod_12 45907601507_78.doc @ 264351
1
2
5
3
4
EIN
AUS
Fig. 208
Pos: 42.35.6 /BA/W artung/Hochdruckf ilter/Filterelement wechseln @ 26\mod_124584160 8710_78.doc @ 264205
Replacing the Filter Element
Pos: 42.35.7 /BA/W artung/Hochdruckf ilter/Ort Hochdruckf ilter Bordhydraulik/ Ar beitshydraulik Bi GPack @ 27\mod_1245907775 757_78.doc @ 264401
The filter (6) of the on-board hydraulic system is located in front of the twine box on the left side
of the machine.
The filter (6.1) for the work hydraulics is located in the front area of the drawbar.
Pos: 42.35.8 /BA/W artung/Umwelt/Hinwei s Entsorgen / Lagern von Öle und Ö lfilter Umwelt @ 32\mod_125 3101375171_78.doc @ 311770
ENVIRONMENT! - Disposal and storage of used lubricants and oil filters
Effect: Environmental damage
Store or dispose used oil and oil filters according to statutory provisions.
Pos: 42.35.9 /BA/W artung/Hochdruckf ilter/Mitteldruckf ilterelement wechse ln(mit Verschmutzun gsanzeige) Text @ 32\mod_1253 779162271_78.doc @ 316939
• Relieve all pressure from the hydraulic system.
• Screw bottom of the filter (4) off the filter head piece (1) and clean it
• Remove the filter element (3) and replace by a new filter element with identical
characteristics
• Push a new filter element (3) onto the valve sleeve (5)
• Check the O-ring seal (2) and replace it, if necessary, by O-ring seal with identical
characteristics
• Screw bottom of the filter (4) back onto the filter head piece
• Charge the hydraulic system with pressure and check for leaks
Pos: 42.36 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165