Krone Big Pack 890 - Knotter Shaft Drive; XC Cutting System Drive

Operation
216
Pos: 34.47 /BA/Bedienung / Großpackenpresse/ Antriebe/Knoter wellenantrieb @ 20\mod_12 38994419456_78.doc @ 225405
11.14 Knotter shaft drive
Fig. 146
BP 890 / BP 1270 BP 1290 BP 12130
The knotter shaft is driven by an angular gear. A universal shaft transmits the torque through
the knotter gear to the knotter shaft.
Pos: 34.48 /BA/Bedienung / Großpackenpresse/ Antriebe/Schneid werkantrieb XC @ 20\mod_123 8994506081_78.doc @ 225429
11.15 XC cutting system drive
Fig. 147
BP 890 / BP 1270 BP 1290 BP 12130
The cutting rotor is driven by an upper angular gear. An intermediate shaft transmits the torque
through a cam-type clutch (1) onto a lower angular gear.
Pos: 34.49 /BA/Bedienung / Großpackenpresse/ Hinweis Nockenschal tkupplung angesproc hen @ 20\mod_1238994789425 _78.doc @ 225453
Note
As soon as the cam-type clutch responds, stop the tractor and reduce the speed until the
machine has cleared itself again. The cam-type clutch now automatically resumes its work.
An error message appears on the display of the control unit.
Pos: 34.50 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165