Operation
210
Pos: 34.27 /BA/Bedienung / Großpackenpresse/ Längeneinstellung der Großpacken @ 20\mod_1238 737507668_78.doc @ 224814
11.10 Length adjustment of the big bales
The length adjustment of the big bales is depending on the equipment of the machine.
11.10.1 Manual length adjustment
Fig. 139
The manual length adjustment for big bales can be made on the left side of the machine from
the ladder. Turning the crank (1) selects the length of big bales. The pointer (2) on the scale (3)
is intended as an adjustment aid.
11.10.2 Electrical length setting (optional)
With an electrical bale length setting the bale length is preselected with the control unit of the
tractor (see chapter “Setting of bale length (only with electrical bale length setting)”).
Pos: 34.28 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165
To Next Page
Loading...
