Krone Big Pack 890 - Switching the Terminal on; off When the Machine Is Not Connected

KRONE ISOBUS-Terminal CCI 100
142
Pos: 28.15 /Überschri ften/Überschri ften 3/A-E/Ein- A usschalten des Terminals bei ni cht angeschlossener Maschine @ 43\mod_12752907 66562_78.doc @ 389835
9.2.3 Switching the terminal on / off when the machine is not connected
Pos: 28.16 /BA/Inf o-Center/CC-IS OBUS-Terminal/CCI-Bi G Pack/Ein- Ausschalten Bi ld mit nicht angeschlo ssener Maschine @ 43\mod_ 1275291241781_78.doc @ 389860
Fig. 88
Pos: 28.17 /BA/Inf o-Center/CC-IS OBUS-Terminal/Module für Beipack/Ein- Aussc halten des Terminals Text mi t Hinweis @ 43\mod_12736 57536203_78.doc @ 384008
Note
Before switching the terminal on for the first time make sure that the connections on the device
are fastened right and securely.
By pressing and holding (for approx. 2 sec.) the key (1)
(ON/OFF) the terminal will be
switched on or off.
Pos: 28.18 /BA/Inf o-Center/CC-ISOBUS- Terminal/Hinweis Handb uch des Herstellers zur ate ziehen @ 47\mod_1285155 240781_78.doc @ 455819
Note
For further information on the functioning of the ISOBUS terminal CCI refer to the terminal
operating instructions included with delivery.
Betriebsanleitung
Version: 1.0
CC-ISOBUS
ISOBUS-Terminal CCI 100/200
Fig. 89
Pos: 28.19 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165