Krone Big Pack 890 - Driving with Pick-Up in Fixed Position

Operation
198
Pos: 34.11 /BA/Einste llungen/Pick- up / Rollenniederhalter /Fahren mit feststehender Pick-up @ 20\mod_12385 78927307_78.doc @ 2220 24
11.2.1 Driving with Pick-up in fixed position
Fig. 130
The working height of the Pick-up can be limited downward by manually moving the stoppers
(1) on either side of the machine. This makes it possible to drive the machine without guide
wheels with the Pick-up in fixed position.
To make the adjustment, loosen the screws (2) and move the depth limiter in the oblong hole to
the desired position. Then tighten the screws again.
Note
Make certain that the depth limiter is in the same position on both sides of the Pick-up.
Pos: 34.12 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165