Driving and Transport
75
Pos: 22.27 /Überschri ften/Überschri ften 3/U-Z/Unterlegkei le @ 33\mod_12542025556 60_78.doc @ 318451
7.3.2 Wheel chocks
Pos: 22.28 /BA/Fahren und Transport/Großpac kenpresse/Unterlegkei le BP 890_1270_1290 @ 25\ mod_1242720216176_78. doc @ 253776
The wheel chocks (1) are located at the rear on the right and left next to the bale channel
chamber
Fig. 35
• Always place the wheel chocks (1) in front of and behind the wheels (this will prevent the
machine from rolling away).
Note
If the machine has a guided coast-down tandem axle (optional), it must be secured with wheel
chocks on the front axle to prevent it from rolling away.
Pos: 23 /BA/-----Seitenumbruch------ @ 0\mod_1196 175311226_0.doc @ 4165
To Next Page
Loading...
