Krone Big Pack 890 - Cutting Length

Operation
201
Pos: 34.15.5 /BA/Ei nstellungen/Schnei dwerk/Schnittlänge Bi gPack @ 32\mod_1253695637 412_78.doc @ 316314
11.4.2 Cutting length
The cutting system of the Big Pack 890 XC can be fitted with a maximum of 16 blades. The
cutting system of the Big Pack 1270 XC / 1290 XC / 1290 HDP XC / 12130 XC can be fitted with
a maximum of 26 blades.
The blades are separated in two groups (upper blade control system and lower blade control
system).
The theoretical chop length is, with full equipping, 44 mm. The chop length is determined by the
number of blades used and the position of the blade control system.
The following blades can be optionally operated via the upper and lower blade control system
with full equipping on
Big Pack 890 XC 0, 8, 8 or 16 blades.
Big Pack 1270 XC / 1290 XC / 12130 XC 0, 13, 13 or 26 blades.
Pos: 34.15.6 /BA/Ei nstellungen/Schnei dwerk/Schnittlänge Tabelle durch Messerbe stückung BigPack @ 20\mod_12 38593907557_78.doc @ 223789
Table cutting length depending on blade equipping
Cutting length
mm
Number of blades
Deployed blade compartment
BP 890 BP1270 / BP1290 /
BP 12130
- 0 0 random *
1
44 16 26 each
88 8 13 every 2nd *
2
132 4 6 every 3rd *
2
*1) fill all blade compartments with blind blades
*2) fill all blade compartments which are not occupied with blind blades
Pos: 34.15.7 /BA/Ei nstellungen/Schnei dwerk/Schnittlänge Tabelle Messerschaltu ng BigPack @ 32\mod_125369 7890568_78.doc @ 3165 69
Table cutting length depending on blade control system (with full equipping)
Cutting length mm
Number of blades
Upper blade
control system
Lower blade control
system
BP 890 BP1270 / BP1290 /
BP 12130
- 0 0 Off Off
88 8 13 On Off
88 8 13 Off On
44 16 26 On On
Pos: 34.15.8 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165