Krone Big Pack 890 - Introduction; Purpose of Use; Validity; Contact

Introduction
14
Pos: 10.1 /BA/Einlei tung/Einleitung @ 0\mod_1 195562498677_78.d oc @ 416
3 Introduction
These operating instructions contain fundamental instructions. These must be observed in
operation and maintenance. For this reason, these operating instructions must be read by
operating personnel before commissioning and use, and must be available for easy reference.
Follow both the general safety instructions contained in the section on safety and the specific
safety instructions contained in the other sections.
Pos: 10.2 /Überschri ften/Überschri ften 2/U-Z/Verwendungs zweck @ 1\mod_120170724673 8_78.doc @ 54055
3.1 Purpose of Use
Pos: 10.3 /BA/Einlei tung/Maschinenüber sicht/Großpackenpr essen/Verwendung szweck BiG Pack 890_1270_1 290 Zusatz T1 @ 25\mod_124220 3444428_78.doc @ 250124
The BiG PACK balers are balers with a “Variable Feeding System”. They produce highly
compacted and dimensionally stable big bales with a length of 1.0 to 2.7 m under all conditions.
Pos: 10.4 /BA/Einlei tung/Maschinenüber sicht/Großpackenpr essen/Verwendung szweck BiG Pack @ 17\mod_12361 69704371_78.doc @ 201567
The baler serves for intake and pressing of agricultural crops formed in swathes such as hay,
straw and grass silage.
Pos: 10.5 /BA/Einlei tung/Maschinenüber sicht/Großpackenpr essen/Aufnahme und Pr essung nicht genannter Pr essgüter @ 17\mod_12361 70563105_78.doc @ 201591
WARNING! – Intake and baling of pressing material not mentioned!
Effect: Damage to the machine
Collecting and baling materials that are not cited here is permitted only in agreement with the
manufacturer. The basic requirements in any case are swath form loading of the crops and
automatic intake by the Pick-up as it passes over them.
Pos: 10.6 /BA/Einlei tung/Gültigkeit/ Grosspackenpresse/ BiG Pack 890_1270_1290 @ 17\ mod_1236163613886_78. doc @ 201311
3.2 Validity
These operating instructions apply to Big Pack Balers of the types:
BiG PACK 890 / XC, BiG PACK 1270 / XC / MultiBale, BiG PACK 1290 / XC and
BiG PACK 1290 HDP / XC.
Pos: 10.7 /Überschri ften/Überschri ften 3/A-E/Ansprechpar tner @ 0\mod_119556939428 6_78.doc @ 839
3.2.1 Contact
Pos: 10.8 /Adressen/Adr esse Maschinenfabr ik KRONE Spelle @ 0\mod_1195 568531083_78.doc @ 734
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Strasse 10
D-48480 Spelle (Germany)
Telephone: + 49 (0) 59 77/935-0 (Head Office)
Fax.: + 49 (0) 59 77/935-339 (Head Office)
Fax.: + 49 (0) 59 77/935-239 (Spare parts - domestic)
Fax.: + 49 (0) 59 77/935-359 (Spare parts - export)
Email: info.ldm@krone.de
Pos: 10.9 /BA/--- --Seitenumbruch-- ---- @ 0\mod_1196175311226_0. doc @ 4165