KRONE operation terminal Gamma
111
Pos: 26.30.26 /BA/I nfo-Center/Großpacke npresse/Hauptmenü s/Hauptmenü 1 Einstel lungen/Menü 1-6-3 „Blas zeit“ @ 18\mod_123798794 9350_78.doc @ 212065
8.11.6.3 Menu 1-6-3 „Blow time“
BPK40654
A
BPK40655
Fig. 64
You can adjust the blowing time on the knotter in this menu.
Calling the menu
Main menu 1-6 "Knotter blowing" appears.
• You can select menu 1-6-3
with the rotary potentiometer. The symbol is shown in
reverse colours
• Press the rotary potentiometer
The display shows menu 1-6-3 "Blow time".
The bar display and value (A) indicate the preselected cleaning time (blow time) in seconds.
The symbol
in the upper line indicates that the displayed value is saved.
• Press key
for softkey DEF: the factory setting value is accepted. The symbol in
the upper line may go out
• Set the desired blow time with the rotary potentiometer. The symbol
in the top line
disappears
• Press the rotary potentiometer. The set contrast value is saved and the symbol
appears in the upper line
• You can use the key
to close the menu currently displayed
The display shows menu level 1-6 "Knotter blowing".
• Pressing the key
repeatedly brings up the basic screen
Pos: 26.30.27 /BA/- ----Seitenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165
To Next Page
Loading...
