Maintenance – lubrication
295
Pos: 42.51.6 /Überschr iften/Überschr iften 2/P-T/Schmierf ette / Schmieröle @ 24\ mod_1241676102945_78. doc @ 247353
15.2 Lubricants
Pos: 42.51.7 /BA/W artung/Großpackenpres sen/Schmierung / Sc hmierplan/Allgemeine s @ 24\mod_1241676457180_ 78.doc @ 247436
15.3 General aspects
Depending on the design, the machine may be equipped with different lubrication systems.
Soft, supple NLGI Class 2 lithium soap greases in accordance with DIN 51825 should be used
as lubricating greases. We recommend that you do not use lubricating greases with any other
base material.
Note
Do not use greases containing graphite! There may be problems when different greases are
mixed together!
Pos: 42.51.8 /BA/W artung/Großpackenpres sen/Schmierung / Sc hmierplan/Tabelle Sc hmierstoffe @ 24\mod_12416 81229992_78.doc @ 247460
Manufacturer Lubricants based on
mineral oil
Bio-lubricants
ARAL Long-term grease H
On request
BP Energrease LS-EP2
DEA Glissando EP2
FINA Marson EPL 2A
Shell Alvania Ep2
ESSO EGL 3144
Pos: 42.51.9 /BA/W artung/Großpackenpres sen/Schmierung / Sc hmierplan/Abschmieren Text allgemein @ 24\mod_12416 83749117_78.doc @ 247535
Lubrication points on the machine must be lubricated at regular intervals. The position of the
lubrication points and the lubrication intervals can be seen in the lubrication plans in the
operating instructions. Remove the grease that comes out of the bearing points after lubrication.
Pos: 42.51.10 /BA/W artung/Großpackenpre ssen/Schmierung / Sc hmierplan/Schmieri ntervalle Bild @ 24\mod_12416 83935492_78.doc @ 247583
BP 380-7-088
939 450-1939 212-1
1050
Fig. 223
Pos: 42.51.11 /BA/W artung/Großpackenpre ssen/Schmierung / Sc hmierplan/Schmieri ntervalle Bedeutung 10 h,50h,200h @ 24\mod_12416 83871742_78.doc @ 247559
Lubrication intervals:
10 h corresponds to about once a day
50 h corresponds to about once a week
200 h corresponds to about once a year
Pos: 42.51.12 /BA/- ----Seitenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165
To Next Page
Loading...
