EasyManua.ls Logo

Krone Big Pack 890 - General Technical Description

Krone Big Pack 890
352 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
24
Pos: 10.42 /BA/Einlei tung/Maschinenüber sicht/Großpackenpr essen/Allgemeine technische Beschrei bung @ 17\mod_1236231937800 _78.doc @ 202991
3.8 General technical description
P.T.O. speed 1000 rpm
Universal shaft Tractor side: wide angle
Machine side: Freewheel clutch
Hitch
BP 890
Hitch coupling; swinging drawbar (perm. supported load min.
1300 kg; XC = 1900 kg) (drawbar adjustable in height)
BP 1270 / BP 1290 / BP 1290 HDP / BP 12130
Towing eye ball head hitch
- permissible supported load: up to 2000 kg
Bottom hitch with ball head hitch
- permissible supported load: up to 2500 kg
Caution! For adjustment the hexagonal head screws
must be tightened with a tightening torque
according to the "Tightening torques“ table in
chapter “Maintenance”.
Support Parking jack, retractable - manually adjustable in height
Optional: Hydraulic parking jack
Uncontrolled Pick-up
(EasyFlow) drum
Hydraulic lift
Height adjustment by perforated bar on the supporting wheel
Tine carrier: 5 pieces
Number of tines: 16 (20) double tines / tine carrier
Lateral feeding Right and left auger conveyor
Variable crop feed (VFS) Forced intake by packer drum
Packer drum with: 5 packer strips and 1 switching
feeder strip
With the XC design, there is also a cutting system arranged
upstream
Baling ram
Stroke length 750 mm
-50 plunger strokes per minute (BiG PACK 890)
-38.5 plunger strokes per minute (BiG PACK 1270 and 1290)
The baling ram moves on 4 rollers (5 / 7 blades on the
plunger)
Setting the baling density Electronic-hydraulic force control (both adjustable from the
tractor)
Twine box on both sides, for a total of 32 twine rolls
Twine Synthetic twines (110-130 m/kg)
For twine roll end and torn
twine
Electrical twine control with acoustic and optical signal
Residual bale ejector / bale
unloading
One-part bale chute (must be folded up in transport)
Operation to be operated according to (Medium - Comfort)
version on the machine or from the tractor
Parking brake Operation by hand crank at the rear left of the baler
Pos: 10.43 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165

Table of Contents

Other manuals for Krone Big Pack 890

Related product manuals