KRONE operation terminal Gamma
115
Pos: 26.31.5 /BA/I nfo-Center/Großpacken presse/Hauptmenüs/ Hauptmenü 2 Zähler/Kund enzähler aktivieren @ 18\mod_123805284184 7_78.doc @ 212813
Activating the customer counter
Fig. 68
• Turn the rotary potentiometer to select the desired customer counter (A) and activate by
turning the rotary potentiometer The desired customer counter (in this case customer
counter 2) is displayed inversely (
2
).
Activating the bale counter (cut / uncut bales)
The activated counter is shown inversely “
“ (in this case counter of uncut bales) and as
softkey
.
• Press the key
for softkey to activate the counter “cut bales”
Pos: 26.31.6 /BA/I nfo-Center/Großpacken presse/Hauptmenüs/ Hauptmenü 2 Zähler/Ba llenanzahl veränder n @ 18\mod_1238053515097_ 78.doc @ 212835
Changing the number of bales
• Turn the rotary potentiometer to select the desired customer counter (A) and activate by
turning the rotary potentiometer
• Select the counter (cut bales, uncut bales) to be changed
• Press the key
for softkey to increase the number of bales
• Press the key
for softkey to reduce the number of bales
At the same time, the season and daily counters are also changed in menu 2-2 "Total bale
counter”, as well as the length counter and knot counter.
Pos: 26.31.7 /BA/I nfo-Center/Großpacken presse/Hauptmenüs/ Hauptmenü 2 Zähler/Kund enzähler löschen @ 18\ mod_1238054080425_78. doc @ 212923
Deleting the customer counter
• Use the rotary potentiometer to place the customer counter to be deleted between the
two crossbars (A)
• Press the key
for softkey
The selected customer counter is set to zero.
• Press the key
to close the menu currently displayed
The display shows menu level 2 "Counters".
• Pressing the key
two times brings up the basic screen
Pos: 26.31.8 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165
To Next Page
Loading...
