KRONE ISOBUS-Terminal CCI 100
147
Fig. 94
Pos: 28.28.11 /BA/I nfo-Center/CC-I SOBUS-Terminal/CCI- BiG Pack/Grundbild Handbe trieb/Handbetrieb P ressklappendruc k (in bar) @ 43\mod_1275040654 296_78.doc @ 389489
Bale channel flap pressure (in bar or PSI according to unit of measurement Metric or US)
The value under the bar display and the height of the bar (1) show the current actual bale
channel flap pressure. The value above the bar display and the markings in the bar display (2)
show the set bale channel flap pressure in bar or PSI.
Pos: 28.28.12 /BA/I nfo-Center/CC-I SOBUS-Terminal/CCI- BiG Pack/Grundbild Handbe trieb/Handbetrieb M ultibale (optiona l) @ 43\mod_1275040650796_7 8.doc @ 389464
MultiBale (optional)
The first value (3) shows the MultiBales currently baled. The second value and the markings (4)
indicate the target number of MultiBales per total bales. A short horn sound is heard after each
MultiBale. If the bale is ready, a longer and louder horn tone will be heard.
Bale length display (only for electrical bale length setting)
The first value in the bar display and the length of the bar (5) indicate the actual status of the
bale length. The second value and marking (6) indicate the target bale length.
Pos: 28.28.13 /BA/- ----Seitenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165
To Next Page
Loading...
