KRONE ISOBUS-Terminal CCI 100
163
Pos: 28.63 /BA/Inf o-Center/CC-ISOBUS- Terminal/CCI-Bi G Pack/Hauptmenüs/Haupt menü 1 Einstellungen/ Menü 1-5 „Zentralschmier ung“ T2/2 @ 44\mod_12753716 39750_78.doc @ 391129
• Set the lubrication duration with the function key or , the symbol in the top line
goes out
• Press the function key
. The set time is saved and the symbol appears in the
upper line
• By pressing the function key
the value of the factory setting appears (press function
key
, the value of the factory setting will be saved, the symbol appears in the
upper line)
Initiate the lubrication process manually
• By pressing the function key
the lubrication process is started for the set duration of
lubrication
• Pressing the function key
closes the called up menu
• Pressing the function key
and holding it down brings up the basic screen
Pos: 28.64 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165
To Next Page
