Krone Big Pack 890 - Page 43

Safety
43
1)
Before starting the machine,
read and observe the operating
instructions and safety
instructions.
Order No.: 939 471-1 (1x)
2)
The P.T.O. speeds must not exceed 1000 rpm!
The operating pressure of the hydraulic system
must not exceed 200 bar / 2900 PSI!
939 101-4
MAX.1000/ min
MAX. 200 bar
Order No.: 939 101-4 (1x)
3)
Danger from rotating auger.
Order No. 939 520 1 (2x)
4)
Never reach into the working
range of the Pick-up as long as
the machine is running.
Order no.: 939 407-1 (2x)
5)
Do not climb onto the machine if
the P.T.O. shaft is connected and
the engine is running.
Order no.: 939 408-2 (1x)
6)
Before start-up close the protective equipment!
Order no.: 942 002-4 (14x)
7)
While parts are moving, never
reach into areas where there is a
risk of being crushed.
(only for roller chute and XC
cutting system XC)
Order No.: 942 196 1 (5x)
8)
Maintain a sufficient distance from hot surfaces.
(optional)
Order no.: 942 210-0 (1x)
Pos: 12.13 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165
939 520-1
942 196 -1