Krone Big Pack 890 - Page 85

KRONE operation terminal Gamma
85
Pos: 26.8.4 /BA/I nfo-Center/Großpackenpr esse/Grundbild Handbetrieb/Softkey s (II) unterste Zeile @ 18\ mod_1237366184385_78. doc @ 209850
Softkeys (II)
The following softkeys are found in the bottom line:
Switching between manual/automatic mode (the activated operation
/ is
displayed).
Switching to automatic mode:
Press the key for softkey . (The symbol will be indicated on the display automatic
mode).
Setting the customer counter
Press the key
for softkey . The menu 2-1 "Customer counter" is displayed (for
settings see menu 2-1 "Customer counter").
Baling information
Press the key
for softkey . (for description refer to chapter “Information window”).
Switching the basic menu page 1/2 to page 2/2. The activated page is shown.
Switching to page 2/2:
Press the key
for softkey . (The symbol will be indicated on the display
manual mode 2/2).
Pos: 26.8.5 /BA/I nfo-Center/Großpackenpr esse/Grundbild Handbetrieb/Softkey s (III) rechte Spalte Sei te 1/2 @ 18\mod_1237371567 056_78.doc @ 209952
Softkeys area (III)
The following softkeys are located in the right column of page 1/2:
•
Lower bale chute
Lower bale chute:
• Press the key
for softkey
•
Lift / lower blade bar (activated mode is displayed)
Lift blade bar:
• Press the key
for softkey
Lower blade bar:
• Press the key
for softkey
Pos: 26.8.6 /BA/- ----Seitenumbruch- ----- @ 0\mod_119617531122 6_0.doc @ 4165