Control Unit – Auxiliary Control
109
Pos: 20.26 /BA/I nfo-Center/Schw ader/Bedienein heit- Komfort/S W 2000/Zusatz bedienung/Anhe ben aller Kreis el Vorgewende- in Transportstell ung SW 2000 @ 2 3\mod_124 0403385567_78 .doc @ 240042 @ 2 @ 1
7.7 Raising All Rotors from the Headland Position to the Transport Position
Pressing the key raises all rotors to the transport position.
Note
Individual rotors cannot be lowered from the headland position to the transport position.
Note
For safety reasons the key must be held down for about 1.5 seconds before the rotors
move from the headland position to transport position.
First the hydraulic cylinders retract the setting for working width and swath width. Then the
supporting wheels are folded in. Finally, the rotors are raised.
Pos: 20.27 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65 @ @ 1
To Next Page
Loading...
